The Team at Navus: Overcoming Challenges for Clients Every Day

Navus

At Navus, every day is a little different. Our team is always working on different machines for different projects to make different parts to satisfy all of our clients. We only deliver projects to our clients that have been tested to perfection and are ready to be installed immediately. 

The reason why we can deliver on our high standards is the very heart and soul of our operation: our team of expert engineers and technicians. The team at Navus works together relentlessly to solve any and all challenges that our clients face.

Meet Alan: Automation Technician, Mechanical Level 4

Alan R. has been a part of our team for nine years. He found his way to Navus while he was studying Mechanical Engineering at Pellissippi State Community College. He began working for our company when he was still in school, and then started working here full-time once he graduated with his degree.

Alan is the reason we can make the different parts for our clients’ projects, and make them well! He’s responsible for translating plans from the engineers into tangible parts used for client projects. We couldn’t serve our clients like we do without Alan’s hard work and dedication!

Translating Engineering Solutions to Physical Parts

Navus: Describe what you do in your role at Navus.

Alan: I take the prints from the engineers and work out how to actually make the parts [for our clients’ projects]. Anything that requires any tolerances, I work out what we have the capacity to do in-house, and make jigs or anything that needs to be made to actually make the parts workable.

Navus: What’s your favorite part about your job and working at Navus?

Alan: It’s varied and challenging. It’s certainly not [typical] production. Everything we do is usually custom to the client’s install. I’m not a big fan of doing the same thing every day. Here, there’s always something new to stretch yourself.

A Team That Forges a Future for Custom Automation

Navus: Describe some of the ways you’ve seen the team at Navus work together to overcome challenges.

Alan: We have developed quite a few welding techniques [at Navus]. We’ve gone through different robotic programming languages to get welds specific to the customer’s satisfaction and needs. We’ve used more than one program in the same part to get the ideal result. I usually spend my time in awe of the technical knowledge and creativity around here.

Navus: What have been your favorite projects to work on?

Alan: One of the jobs in the shop at the moment was one that I worked on when we originally built it. The first iteration of this job had a lot of detail and challenging parts for me to make. It’s been a while since it was here, so I get to restart that project anew and face the same challenges again. I think that’s a fun and an exciting part of my job.

Navus: What do you hope for your future at Navus?

Alan: We’ve got a few jobs coming in that are going to require utilizing some more of the features of the water jet, and getting the parts closer to being completely finished before they come into the machine area. Ideally, I’d like to get to the point where we have the capability of having parts made to much tighter tolerances, and produce much cleaner parts to the customer’s satisfaction. Some of our newer engineers have this same mindset and motivation. It’s nice to see the chance for our team to continue to improve for the sake of our customers’ satisfaction.

Forging the Future & Clarifying the Complex of Custom Automation

Navus’ team is made up of hand-picked individuals who bring a variety of backgrounds and experiences to our work. One of our values as a team is the ability to collaborate and overcome any challenges our clients face. Team members like Alan are part of the reason that our high standards for the solutions and products we deliver are possible!

If you’re interested in learning more about how we can help overcome your challenges through custom automation solutions, or if you’re interested in joining the Navus family, reach out to us today. You can contact us by emailing info@navusinc.com

The Team at Navus: A Workplace to Grow & Learn

Navus

Ask anyone who’s been working in their career for a while, and no matter their industry, they’ll tell you that you don’t learn everything in school. Once you’ve graduated college and start your first job in your professional career, you’ll continue to find opportunities to learn and master new skills that will help you in your future.

At Navus, we take pride in investing in our employees. Our staff is encouraged to learn and grow in areas they’re interested in. The result is a safe, fun, and rewarding workplace with opportunities for professional growth. 

Meet Mike: Weld Engineer, Programmer, and CWI (Certified Welding Inspector)

Mike T. has worked at Navus for a total of 13 years. He began his career with us directly after graduating from Ferris State University as a welder with a degree in Welding Engineering and Welding Education. Mike worked in this position for a total of two years before working a different job for a short period of time before returning to Navus as a Weld Engineer and CWI, and he’s been here ever since.

We recently had the opportunity to sit down with Mike and ask him some questions about his job at Navus. He’s a crucial part of our team, and we’re excited to share just a portion of his story!

Work That’s Different Every Day

Navus: Describe what you do in your role at Navus.

Mike: It depends on the job. If there’s a robotics job, I’ll be in charge of a lot of the robotics programming. If there’s a welding development job, I’ll be in charge of the development for [that job]. Any sort of welder certification or inspection, I would be over [that process]. And then I provide random tech support.

Navus: How did you end up in this career, and ultimately at Navus?

Mike: I went to Ferris State University for Welding Engineering and Welding Education with the intention of being a Welding Engineer or a Welding Instructor. I pretty much picked an area where I wanted to live (I lived in Michigan at the time), and I decided that near the Smoky Mountains was where I wanted to live, so I moved and then found a job here at Navus as a welder. 

I was drawn to the area because I am an avid hiker and motorcyclist. There are some pretty epic trails here, some nice riding, and just a beautiful area compared to Michigan. And I HATE cold (not ideal for living in Michigan).

Navus: What’s your favorite part about your job and working at Navus?

Mike: I like how it always changes. It’s not the same thing week to week. I get to learn new things. I did not go to school for programming, but I’ve been able to learn programming here. If you can learn it here, you can move into it. I really like that you’re not stuck in one job if you’re willing to learn new things.

A Team That Works Together to Overcome Challenges

Mike: I also like that Navus is a small company. Everyone knows everybody, and everyone’s willing to help each other out. Nobody’s like, “That’s not my job.” I like that aspect.

Navus: Describe some of the ways you’ve seen the team at Navus work together to overcome challenges.

Mike: We recently worked on a project with a cable management issue, and pretty much the whole engineering team and the guys out on the floor (including the welders and fabricators), were all pitching in ideas to come up with different ways to solve a really complicated problem with cabling and a robot that had to do a bunch of very complicated moves. It took time to get the final product, but nobody gave up on it.

Navus: What have been your favorite projects to work on?

Mike: I’ve been working on one project for almost 11 years. It’s one of the first things I worked on, and we’re still continuing to do things for the client. It’s where I started learning programming, and I’m still involved with it since it’s a more complicated project. Some of the other projects I enjoy are anything involving ABB [robotics] and programming, just because it’s such fun code to write.

Navus: What do you hope for your future at Navus?

Mike: I’d like to get into PLC programming. I’ve started dabbling in HMI programming and screen setup. Pretty much any new language that I can dabble in, so I can basically move into more of just a programming role.

Forging the Future & Clarifying the Complex of Custom Automation

Navus’ team is made up of hand-picked individuals who bring a variety of backgrounds and experiences to our work. One of our values as a team is the ability to collaborate to overcome any challenges our clients face. Team members like Mike are part of the reason that our high standards for the solutions and products we deliver are possible!

If you’re interested in learning more about how we can help overcome your challenges through custom automation solutions, or if you’re interested in joining the Navus family, reach out to us today. You can contact us by emailing info@navusinc.com